Features of the High Pressure Suspension Grinder Machine
Features of the High Pressure Suspension Grinder Machine:
1. Compared with the common Raymond mill under the same power conditions, the capacity can be increased by 10%; moreover, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 800-1200kgf..
2. The final product size ranges from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.033mm (425 mesh). A few materials can reach 0.013mm (1000 mesh).
3. All the mineral materials with Mohs hardness below 9.3 can be crushed
4. The grinding device adopts a superposition multi-grade sealing with good sealing performance. 5. Its dust-removing effect fully meets the national dust discharge standard.
6. The classifier is easy for adjustment.
1. Compared with the common Raymond mill under the same power conditions, the capacity can be increased by 10%; moreover, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 800-1200kgf..
2. The final product size ranges from the maximum particle diameter of 0.613mm (30mesh) to the finest diameter of 0.033mm (425 mesh). A few materials can reach 0.013mm (1000 mesh).
3. All the mineral materials with Mohs hardness below 9.3 can be crushed
4. The grinding device adopts a superposition multi-grade sealing with good sealing performance. 5. Its dust-removing effect fully meets the national dust discharge standard.
6. The classifier is easy for adjustment.